Toughened safety glass in Leatherhead

What should toughened safety glass cost in Leatherhead?

Typical prices for toughened safety glass in Leatherhead are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

Heat-soaked option for large and overhead panes
Made to measure for each opening
Breaks into small blunt fragments
Four to five times the strength of annealed glass
Single panes or the outer pane of a sealed unit
Holes, notches and polished edges for frameless fittings

Fitting in Leatherhead and nearby

We arrange surveys and fitting in Leatherhead and across the KT22 postcode district, as well as in nearby Epsom (4 miles) and Ewell (5 miles). Dates depend on installer availability.

Surrey's commuter towns such as Guildford, Woking and Epsom mix Victorian and inter-war houses with modern glazed offices, while Farnham and Godalming have extensive conservation areas.

Good candidates for toughened safety glass:

Frameless office partitions and doors
Balustrades in a laminated toughened makeup
Glazed doors and side panels
Panes below 800 mm in homes and offices

Before the glass is ordered

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Glazing rules in England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Guide price online or by phone
Survey in Leatherhead
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Leatherhead: questions

Do you cover Epsom as well as Leatherhead?

Yes. As well as Leatherhead, we can arrange surveys in nearby Epsom, Ewell and Esher. Dates depend on installer availability.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Leatherhead

Tell us about the glazing and we will come back with a guide price.