Toughened safety glass in Kidsgrove

What should toughened safety glass cost in Kidsgrove?

Guide prices for toughened safety glass in Kidsgrove are £114 to £414 including VAT (£95 to £345 plus VAT) per pane for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Clear, tinted, obscure, low-iron and sandblasted finishes
Breaks into small blunt fragments
Heat-soaked option for large and overhead panes
Holes, notches and polished edges for frameless fittings
Made to BS EN 12150 and marked for identification
Made to measure for each opening

Fitting in Kidsgrove and nearby

We can arrange toughened safety glass anywhere in Kidsgrove, and in nearby Congleton, Newcastle-under-Lyme and Stoke-on-Trent. Tell us your postcode and we will offer dates.

Staffordshire mixes Stoke-on-Trent's Victorian pottery-town terraces with Lichfield's cathedral quarter, Burton's brewery streets and newer estates around Tamworth and Cannock.

Good candidates for toughened safety glass:

Balustrades in a laminated toughened makeup
Shower screens and splashbacks
Panes below 800 mm in homes and offices
Frameless office partitions and doors

Before the glass is ordered

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Glazing rules in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Send sizes or use the quote tool
Free survey at your Kidsgrove address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Kidsgrove: questions

Which areas near Kidsgrove do you cover?

We can arrange work in Kidsgrove and in nearby Congleton (5 miles), Newcastle-under-Lyme (6 miles) and Stoke-on-Trent (6 miles). Dates depend on installer availability.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Kidsgrove

Ready for a price? Use the form or call 0800 088 6248.