Toughened safety glass in Nottingham

What is the price of toughened safety glass in Nottingham?

Our guide range for toughened safety glass in Nottingham is £114 to £414 including VAT (£95 to £345 plus VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Specification at a glance

Clear, tinted, obscure, low-iron and sandblasted finishes
Made to measure for each opening
Four to five times the strength of annealed glass
Single panes or the outer pane of a sealed unit
Made to BS EN 12150 and marked for identification
Holes, notches and polished edges for frameless fittings

Fitting in Nottingham and nearby

We arrange surveys and fitting across Nottingham and the NG1 postcode district, and in nearby West Bridgford (2 miles), Arnold (3 miles) and Hucknall.

Nottinghamshire mixes Nottingham's Lace Market warehouses and city-centre shops with Victorian terraces, post-war estates around Mansfield and Worksop, and Georgian Newark and Southwell.

This glazing suits:

Balustrades in a laminated toughened makeup
Panes below 800 mm in homes and offices
Shower screens and splashbacks
Glazed doors and side panels

Questions we will ask at the survey

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Building regulations and safety in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Toughened safety glass in Nottingham: questions

Do you cover West Bridgford as well as Nottingham?

Yes. As well as Nottingham, we can arrange surveys in nearby West Bridgford, Arnold and Hucknall. Dates depend on installer availability.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Toughened safety glass in nearby towns

Other glazing in Nottingham

Get a guide price now and book your free survey in Nottingham.