Toughened safety glass in Ilkeston

What should toughened safety glass cost in Ilkeston?

Typical prices for toughened safety glass in Ilkeston are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

Made to measure for each opening
Clear, tinted, obscure, low-iron and sandblasted finishes
Four to five times the strength of annealed glass
Heat-soaked option for large and overhead panes
Breaks into small blunt fragments
Holes, notches and polished edges for frameless fittings

Fitting in Ilkeston and nearby

We arrange surveys and fitting in Ilkeston and across the DE7 postcode district, as well as in nearby Heanor (4 miles) and Long Eaton (5 miles). Dates depend on installer availability.

Derbyshire combines Derby's Victorian terraces and city-centre shops with gritstone villages and spa towns in the Peak District, where Bakewell and Buxton have conservation areas.

Good candidates for toughened safety glass:

Balustrades in a laminated toughened makeup
Glazed doors and side panels
Panes below 800 mm in homes and offices
Frameless office partitions and doors

Before the glass is ordered

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Glazing rules in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Guide price online or by phone
Survey in Ilkeston
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Ilkeston: questions

Do you cover Heanor as well as Ilkeston?

Yes. As well as Ilkeston, we can arrange surveys in nearby Heanor, Long Eaton and Ripley. Dates depend on installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Ilkeston

Tell us about the glazing and we will come back with a guide price.