Toughened safety glass in Ashington

What should toughened safety glass cost in Ashington?

Typical prices for toughened safety glass in Ashington are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

Made to measure for each opening
Heat-soaked option for large and overhead panes
Made to BS EN 12150 and marked for identification
Holes, notches and polished edges for frameless fittings
Breaks into small blunt fragments
Clear, tinted, obscure, low-iron and sandblasted finishes

Fitting in Ashington and nearby

We arrange surveys and fitting in Ashington and across the NE63 postcode district, as well as in nearby Blyth (4 miles) and Morpeth (5 miles). Dates depend on installer availability.

Northumberland is mostly rural, with stone market towns such as Hexham, Alnwick and Morpeth, former mining towns like Ashington and Blyth, and coastal villages open to North Sea winds.

Good candidates for toughened safety glass:

Shower screens and splashbacks
Balustrades in a laminated toughened makeup
Frameless office partitions and doors
Panes below 800 mm in homes and offices

Before the glass is ordered

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Glazing rules in England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Guide price online or by phone
Survey in Ashington
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Ashington: questions

Do you cover Blyth as well as Ashington?

Yes. As well as Ashington, we can arrange surveys in nearby Blyth, Morpeth and Cramlington. Dates depend on installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Ashington

Tell us about the glazing and we will come back with a guide price.