Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Toughened safety glass · TS1 · North Yorkshire

Toughened safety glass in Middlesbrough

Toughened safety glass for homes and businesses in Middlesbrough, specified after a free survey and fitted by glaziers working under our contract with you.

Frameless toughened glass partition and door in a bright office corridor
Free survey

Free quote in Middlesbrough

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

How much does toughened safety glass cost in Middlesbrough?

Typical prices for toughened safety glass in Middlesbrough are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

  • Single panes or the outer pane of a sealed unit
  • Holes, notches and polished edges for frameless fittings
  • Four to five times the strength of annealed glass
  • Clear, tinted, obscure, low-iron and sandblasted finishes
  • Heat-soaked option for large and overhead panes
  • Made to measure for each opening

Fitting in Middlesbrough and nearby

Surveys in Middlesbrough (TS1) are booked around installer availability. We also cover nearby Billingham (2 miles), Stockton-on-Tees (3 miles) and Thornaby-on-Tees (4 miles).

North Yorkshire includes York's walled city and listed streets, Harrogate's Victorian stone terraces, Middlesbrough's town centre and coastal Scarborough and Whitby.

Typical places for toughened safety glass:

  • Balustrades in a laminated toughened makeup
  • Panes below 800 mm in homes and offices
  • Shower screens and splashbacks
  • Glazed doors and side panels

Things to decide before you order

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Rules that apply in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

  1. Guide price online or by phone
  2. Survey in Middlesbrough
  3. Accept the fixed quote
  4. Fitted by glaziers working under our contract

Toughened safety glass in Middlesbrough: questions

Can you survey in Middlesbrough and nearby towns?

Yes. Surveys in Middlesbrough, Billingham and Stockton-on-Tees are booked around installer availability.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Middlesbrough

Tell us about the glazing and we will come back with a guide price.

Get a guide price for Middlesbrough

Free survey for new installations in Middlesbrough and the TS1 area. Fixed price in writing before anything is ordered.

CallGet a price