Toughened safety glass in Stockton-on-Tees

How much does toughened safety glass cost in Stockton-on-Tees?

Our guide range for toughened safety glass in Stockton-on-Tees is £114 to £414 including VAT (£95 to £345 plus VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Options for toughened safety glass in Stockton-on-Tees

Clear, tinted, obscure, low-iron and sandblasted finishes
Heat-soaked option for large and overhead panes
Breaks into small blunt fragments
Holes, notches and polished edges for frameless fittings
Made to measure for each opening
Made to BS EN 12150 and marked for identification

Fitting in Stockton-on-Tees and nearby

Stockton-on-Tees is about 18 miles from Durham, the main centre for Durham. We can survey and fit across the TS19 district and in nearby places such as Billingham and Thornaby-on-Tees.

County Durham runs from Durham City's listed streets around the cathedral to former colliery-village terraces, Darlington's Victorian centre and newer estates along the A1(M).

Typical places for toughened safety glass:

Shower screens and splashbacks
Panes below 800 mm in homes and offices
Frameless office partitions and doors
Glazed doors and side panels

Things to decide before you order

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Rules that apply in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Toughened safety glass in Stockton-on-Tees: questions

Which areas near Stockton-on-Tees do you cover?

We can arrange work in Stockton-on-Tees and in nearby Billingham (2 miles), Thornaby-on-Tees (3 miles) and Middlesbrough (3 miles). Dates depend on installer availability.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Stockton-on-Tees

Get a guide price now and book your free survey in Stockton-on-Tees.