Toughened safety glass in Boston

Toughened safety glass in Boston: what will it cost?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Boston. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

Four to five times the strength of annealed glass
Holes, notches and polished edges for frameless fittings
Clear, tinted, obscure, low-iron and sandblasted finishes
Made to measure for each opening
Made to BS EN 12150 and marked for identification
Heat-soaked option for large and overhead panes

Fitting in Boston and nearby

We arrange surveys and fitting in Boston and across the PE21 postcode district, as well as in nearby Spalding (14 miles) and Sleaford (16 miles). Dates depend on installer availability.

Lincolnshire spans Lincoln's hilltop historic quarter, Georgian Stamford, market towns across the Wolds and Fens, and coastal resorts such as Skegness and Cleethorpes.

Typical settings for toughened safety glass:

Shower screens and splashbacks
Frameless office partitions and doors
Panes below 800 mm in homes and offices
Balustrades in a laminated toughened makeup

Getting the right glass for your building

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

What the rules say in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Send sizes or use the quote tool
Free survey at your Boston address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Boston: questions

Do you cover Spalding as well as Boston?

Yes. As well as Boston, we can arrange surveys in nearby Spalding, Sleaford and Skegness. Dates depend on installer availability.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Toughened safety glass in nearby towns

Other glazing in Boston

Ready for a price? Use the form or call 0800 088 6248.