Toughened safety glass in Lincolnshire

How much does toughened safety glass cost in Lincolnshire?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Lincolnshire. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Made to measure for each opening
Single panes or the outer pane of a sealed unit
Four to five times the strength of annealed glass
Holes, notches and polished edges for frameless fittings
Breaks into small blunt fragments
Made to BS EN 12150 and marked for identification

Covering Lincolnshire

We can arrange surveys and fitting anywhere in Lincolnshire, including Lincoln and Grimsby. Dates depend on installer availability. Choose your town below for local details.

Lincolnshire spans Lincoln's hilltop historic quarter, Georgian Stamford, market towns across the Wolds and Fens, and coastal resorts such as Skegness and Cleethorpes.

Typical places for toughened safety glass:

Balustrades in a laminated toughened makeup
Frameless office partitions and doors
Glazed doors and side panels
Panes below 800 mm in homes and offices

Towns in Lincolnshire

Things to decide before you order

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Rules that apply in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Guide price online or by phone
Survey in Lincolnshire
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Lincolnshire: questions

Which towns in Lincolnshire do you cover?

We can arrange work anywhere in Lincolnshire, including Lincoln, Grimsby, Scunthorpe, Boston and Grantham, and in other towns across the area.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Other glazing in Lincolnshire

Tell us about the glazing and we will come back with a guide price.

Free quote in Lincolnshire