Toughened safety glass in Oldham

Toughened safety glass in Oldham: what will it cost?

Budget £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Oldham, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

Made to BS EN 12150 and marked for identification
Single panes or the outer pane of a sealed unit
Breaks into small blunt fragments
Made to measure for each opening
Heat-soaked option for large and overhead panes
Clear, tinted, obscure, low-iron and sandblasted finishes

Fitting in Oldham and nearby

Surveys in Oldham (OL1) are booked around installer availability. We also cover nearby Chadderton (1 mile), Royton (2 miles) and Failsworth (3 miles).

Greater Manchester mixes city-centre offices and converted mills with Victorian terraces in Salford, Oldham and Bolton, suburban high streets and large out-of-town retail parks.

Typical settings for toughened safety glass:

Panes below 800 mm in homes and offices
Balustrades in a laminated toughened makeup
Glazed doors and side panels
Shower screens and splashbacks

Getting the right glass for your building

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

What the rules say in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Guide price online or by phone
Survey in Oldham
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Oldham: questions

Can you survey in Oldham and nearby towns?

Yes. Surveys in Oldham, Chadderton and Royton are booked around installer availability.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Toughened safety glass in nearby towns

Other glazing in Oldham

Tell us about the glazing and we will come back with a guide price.