Toughened safety glass in Dundee and Angus

How much does toughened safety glass cost in Dundee and Angus?

As a guide, allow £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Dundee and Angus, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

Holes, notches and polished edges for frameless fittings
Made to BS EN 12150 and marked for identification
Clear, tinted, obscure, low-iron and sandblasted finishes
Single panes or the outer pane of a sealed unit
Breaks into small blunt fragments
Four to five times the strength of annealed glass

Covering Dundee and Angus

We can arrange surveys and fitting anywhere in Dundee and Angus, including Dundee and Arbroath. Dates depend on installer availability. Choose your town below for local details.

Dundee's waterfront offices and city-centre shops sit among sandstone tenements, while Angus has the market town of Forfar and coastal Arbroath, Carnoustie and Montrose.

Typical places for toughened safety glass:

Balustrades in a laminated toughened makeup
Frameless office partitions and doors
Panes below 800 mm in homes and offices
Glazed doors and side panels

Towns in Dundee and Angus

Things to decide before you order

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Rules that apply in Scotland

Scotland

Replacing glass in an existing frame

In Scotland, replacing glass in an existing frame is normally treated as a repair rather than work needing a building warrant. Whether replacing whole windows or doors needs a warrant depends on the building, and the work should still meet the building standards. The council's building standards service can confirm what applies.

Safety glass in critical locations

In Scotland, standard 4.8 of the Building Standards technical handbooks covers glazing at risk of human impact. Panes within 800 mm of floor level, in a door leaf, or within 300 mm of a door leaf and up to 1.5 m above the floor should resist impact in line with BS 6262-4, or be guarded. Laminated and toughened glass are the usual ways to meet it.

How it works

Guide price online or by phone
Survey in Dundee and Angus
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Dundee and Angus: questions

Which towns in Dundee and Angus do you cover?

We can arrange work anywhere in Dundee and Angus, including Dundee, Arbroath, Forfar and Montrose.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Other glazing in Dundee and Angus

Tell us about the glazing and we will come back with a guide price.