Toughened safety glass in Poole

Toughened safety glass in Poole: what will it cost?

As a guide, allow £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Poole, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Glass and fitting options

Clear, tinted, obscure, low-iron and sandblasted finishes
Single panes or the outer pane of a sealed unit
Made to measure for each opening
Heat-soaked option for large and overhead panes
Four to five times the strength of annealed glass
Holes, notches and polished edges for frameless fittings

Fitting in Poole and nearby

From the BH15 district we also cover Bournemouth (5 miles) and Christchurch (9 miles). Survey dates depend on installer availability.

Dorset covers Bournemouth and Poole's seafront hotels, offices and shopping streets, Georgian fronts in Weymouth, and stone market towns such as Dorchester, Bridport and Sherborne.

Typical settings for toughened safety glass:

Frameless office partitions and doors
Shower screens and splashbacks
Balustrades in a laminated toughened makeup
Panes below 800 mm in homes and offices

Getting the right glass for your building

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

What the rules say in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Toughened safety glass in Poole: questions

Can you survey in Poole and nearby towns?

Yes. Surveys in Poole, Bournemouth and Christchurch are booked around installer availability.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Poole

Start with a guide price online, then we survey and fix the price in writing.

Free quote in Poole