Toughened safety glass in Torquay

How much does toughened safety glass cost in Torquay?

Budget £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Torquay, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

Clear, tinted, obscure, low-iron and sandblasted finishes
Holes, notches and polished edges for frameless fittings
Made to measure for each opening
Single panes or the outer pane of a sealed unit
Breaks into small blunt fragments
Made to BS EN 12150 and marked for identification

Fitting in Torquay and nearby

Surveys in Torquay (TQ1) are booked around installer availability. We also cover nearby Paignton (3 miles), Newton Abbot (6 miles) and Exmouth (12 miles).

Devon spans Exeter's Georgian and post-war centre, Plymouth's rebuilt 1950s shopping streets and waterfront offices, and seaside towns where sea air is hard on window frames and seals.

Typical places for toughened safety glass:

Glazed doors and side panels
Shower screens and splashbacks
Frameless office partitions and doors
Balustrades in a laminated toughened makeup

Things to decide before you order

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Rules that apply in England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Send sizes or use the quote tool
Free survey at your Torquay address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Torquay: questions

Can you survey in Torquay and nearby towns?

Yes. Surveys in Torquay, Paignton and Newton Abbot are booked around installer availability.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Toughened safety glass in nearby towns

Other glazing in Torquay

Ready for a price? Use the form or call 0800 088 6248.