Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Toughened safety glass · BT66 · County Armagh

Toughened safety glass in Lurgan

Toughened safety glass for homes, flats, shops and offices in Lurgan, with the glass makeup confirmed in writing before it is ordered.

Frameless toughened glass partition and door in a bright office corridor
Free survey

Free quote in Lurgan

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

Toughened safety glass in Lurgan: what will it cost?

Guide prices for toughened safety glass in Lurgan are £114 to £414 including VAT (£95 to £345 plus VAT) per pane for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Glass and fitting options

  • Breaks into small blunt fragments
  • Holes, notches and polished edges for frameless fittings
  • Clear, tinted, obscure, low-iron and sandblasted finishes
  • Four to five times the strength of annealed glass
  • Heat-soaked option for large and overhead panes
  • Made to measure for each opening

Fitting in Lurgan and nearby

From the BT66 district we also cover Craigavon (2 miles) and Portadown (5 miles). Survey dates depend on installer availability.

County Armagh centres on Armagh's Georgian city, with the town-centre shops and older terraces of Portadown and Lurgan and rural villages across the orchard county.

Typical settings for toughened safety glass:

  • Glazed doors and side panels
  • Balustrades in a laminated toughened makeup
  • Panes below 800 mm in homes and offices
  • Frameless office partitions and doors

Getting the right glass for your building

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

What the rules say in Northern Ireland

Northern Ireland

Fire-rated glass is different

Glass in fire doors and fire screens must be fire-rated glass tested within that system, under Technical Booklet E and, for non-domestic premises, the Fire and Rescue Services (Northern Ireland) Order 2006 and Fire Safety Regulations (Northern Ireland) 2010. Security and laminated glass are not fire-rated unless the product is tested for it.

Glazing in workplaces

The Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993 contain an equivalent requirement to Great Britain's: windows and transparent surfaces in walls, partitions, doors and gates must be of safety material or protected where health or safety requires it, and marked so they are apparent. The employer's risk assessment decides where.

How it works

  1. Tell us about the glazing
  2. Survey, measuring and frame check
  3. Written quote naming the glass
  4. Fitting and handover

Toughened safety glass in Lurgan: questions

Can you survey in Lurgan and nearby towns?

Yes. Surveys in Lurgan, Craigavon and Portadown are booked around installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Toughened safety glass in nearby towns

Other glazing in Lurgan

Get a guide price now and book your free survey in Lurgan.

Get a guide price for Lurgan

Free survey for new installations in Lurgan and the BT66 area. Fixed price in writing before anything is ordered.

CallGet a price