Toughened safety glass in County Armagh

Toughened safety glass in County Armagh: what will it cost?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in County Armagh. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Specification at a glance

Clear, tinted, obscure, low-iron and sandblasted finishes
Four to five times the strength of annealed glass
Holes, notches and polished edges for frameless fittings
Heat-soaked option for large and overhead panes
Made to BS EN 12150 and marked for identification
Single panes or the outer pane of a sealed unit

Covering County Armagh

We can arrange surveys and fitting anywhere in County Armagh, including Armagh and Craigavon. Dates depend on installer availability. Choose your town below for local details.

County Armagh centres on Armagh's Georgian city, with the town-centre shops and older terraces of Portadown and Lurgan and rural villages across the orchard county.

Typical settings for toughened safety glass:

Balustrades in a laminated toughened makeup
Shower screens and splashbacks
Glazed doors and side panels
Frameless office partitions and doors

Towns in County Armagh

Getting the right glass for your building

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

What the rules say in Northern Ireland

Northern Ireland

Glazing in workplaces

The Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993 contain an equivalent requirement to Great Britain's: windows and transparent surfaces in walls, partitions, doors and gates must be of safety material or protected where health or safety requires it, and marked so they are apparent. The employer's risk assessment decides where.

Replacing glass in an existing frame

Building regulations in Northern Ireland are administered by the eleven councils' building control services. Replacing only the glass in an existing frame is generally treated as a repair, while replacing whole windows or doors can be controlled work, so check with building control first. New glass in a critical location should be safety glass under Part V.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Toughened safety glass in County Armagh: questions

Which towns in County Armagh do you cover?

We can arrange work anywhere in County Armagh, including Armagh, Craigavon, Lurgan and Portadown.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Other glazing in County Armagh

Get a guide price now and book your free survey in County Armagh.