Security secondary glazing in Richmond: what will it cost?
Typical prices for security secondary glazing in Richmond are £594 to £1,794 including VAT (£495 to £1,495 plus VAT) per window, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.
Security secondary glazing is a separate slim window fitted on the room side of an existing window, glazed with laminated glass so it forms a second barrier. It leaves the original window untouched outside, which makes it a common choice for listed buildings, conservation areas and period sash windows.
Choices you can make
- Low-E glass for better insulation
- Colour-matched frames to suit the room
- Fixed within the reveal, leaving the original window untouched
- Locks and catches that open from inside without a key
- Vertical sliding, horizontal sliding, hinged and lift-out styles
- Suits sash, casement and arched openings
Fitting in Richmond and nearby
We can arrange security secondary glazing anywhere in Richmond, and in nearby Isleworth, Hounslow and Barnes. Tell us your postcode and we will offer dates.
Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.
Typical settings for security secondary glazing:
- Period sash windows with original glass
- Homes on busy roads wanting noise reduction
- Ground-floor flats in converted townhouses
- Offices in historic buildings
Getting the right glass for your building
How it opens
Match the opening style to the original window so both can be opened, cleaned and used for ventilation.
Escape and ventilation
On windows used for escape, the secondary glazing must open quickly from inside without a key or tool.
What the rules say in England
Listed buildings and conservation areas
In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.
Windows needed for escape
Approved Document B expects many habitable rooms in houses, particularly upstairs, to have an escape window with a clear opening of at least 0.33 m², at least 450 mm high and 450 mm wide, with the bottom of the opening no more than 1,100 mm above the floor. Changing the glass does not alter that, but locks, secondary glazing and film must not stop the window opening. Laminated glass is hard to break through, so escape always relies on the window opening.
How it works
- Guide price online or by phone
- Survey in Richmond
- Accept the fixed quote
- Fitted by glaziers working under our contract
Security secondary glazing in Richmond: questions
Which areas near Richmond do you cover?
We can arrange work in Richmond and in nearby Isleworth (2 miles), Hounslow (2 miles) and Barnes (3 miles). Dates depend on installer availability.
Will secondary glazing cause condensation?
A well-fitted unit usually reduces condensation on the inner pane. Some ventilation of the gap may be needed, which we discuss at the survey.
Does secondary glazing reduce noise?
Yes, often noticeably, because of the air gap between the two panes. Laminated glass helps further.
Do I need permission for secondary glazing in a listed building?
It depends on the building and the council. Internal secondary glazing usually has less impact than replacement windows, but listed building consent may still be needed. Ask the conservation officer before ordering.
Security secondary glazing in nearby towns
Other glazing in Richmond
- Misted unit replacement with laminated glass
- Laminated security glass
- Laminated roof and conservatory glass
- Safety glazing for schools and public buildings
- Security glazed doors and screens
- Patio and bifold door security glass
Tell us about the glazing and we will come back with a guide price.
