Security double-glazed units in Brentwood

What is the price of security double-glazed units in Brentwood?

Budget £174 to £594 including VAT (£145 to £495 plus VAT) per unit for security double-glazed units in Brentwood, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.

Glass and fitting options

Low-E coating and argon fill for insulation
Security glazing tape or clips where beads are external
Made to measure for each sash, light and door panel
Warm-edge spacer bars in black, grey or white
24 mm, 28 mm and other overall thicknesses to suit frames
Obscure and decorative glass for bathrooms and doors

Fitting in Brentwood and nearby

From the CM14 district we also cover Billericay (5 miles) and Hornchurch (6 miles). Survey dates depend on installer availability.

Essex runs from Chelmsford and Colchester's town-centre retail and Georgian streets to Southend's seafront and large post-war and new-build estates in Basildon and Harlow.

This glazing suits:

Glazed back and side doors
Replacing misted or damaged units
Windows in flats on walkways and balconies
Patio doors and bifolds

Questions we will ask at the survey

Which pane is laminated

Laminating the inner pane is the usual security choice. Laminating both panes adds protection on high-risk elevations.

Internal or external beads

If your beads are on the outside, we add security tape or clips so the unit cannot be lifted out after the beads are removed.

Building regulations and safety in England

England

Security rules for new homes

Approved Document Q has applied to new homes in England since 1 October 2015. Easily accessible doors and windows, meaning any part within 2 m vertically of the ground or another accessible surface, should meet PAS 24 or an equivalent, and glazing in doors and in windows within 400 mm of a door should be laminated to at least BS EN 356 P1A. It does not apply when you change the glass in an existing home, although it is a sensible benchmark.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain