Security double-glazed units in Basildon

Security double-glazed units in Basildon: what will it cost?

Budget £174 to £594 including VAT (£145 to £495 plus VAT) per unit for security double-glazed units in Basildon, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.

Glass and fitting options

Laminated inner pane, outer pane or both
Warm-edge spacer bars in black, grey or white
Made to measure for each sash, light and door panel
24 mm, 28 mm and other overall thicknesses to suit frames
Obscure and decorative glass for bathrooms and doors
Toughened outer pane where safety glass is required

Fitting in Basildon and nearby

From the SS14 district we also cover Stanford-le-Hope (3 miles) and Wickford (4 miles). Survey dates depend on installer availability.

Essex runs from Chelmsford and Colchester's town-centre retail and Georgian streets to Southend's seafront and large post-war and new-build estates in Basildon and Harlow.

Typical settings for security double-glazed units:

Replacing misted or damaged units
Windows in flats on walkways and balconies
Glazed back and side doors
Patio doors and bifolds

Getting the right glass for your building

Overall thickness

The new unit must suit the frame's glazing rebate. If your frames only take thin units, we use thinner laminates or adjust the beads.

Which pane is laminated

Laminating the inner pane is the usual security choice. Laminating both panes adds protection on high-risk elevations.

What the rules say in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Security double-glazed units in Basildon: questions

Can you survey in Basildon and nearby towns?

Yes. Surveys in Basildon, Stanford-le-Hope and Wickford are booked around installer availability.

Will a laminated unit be heavier?

A little. A laminated pane weighs about the same as a solid sheet of the same thickness. On large opening sashes we check hinges and friction stays.

Can I just replace the glass and keep my frames?

Yes, if the frames are sound. We measure each unit, make security units to the same size and fit them into your existing frames.

Which pane should be laminated?

Usually the inner pane, so smashing the outer pane does not create an opening. On doors and low panes the outer pane is normally toughened to meet safety rules.

Security double-glazed units in nearby towns

Other glazing in Basildon

Get a guide price now and book your free survey in Basildon.