How much should I budget for laminated glass retrofit in Poole?
Budget £174 to £534 including VAT (£145 to £445 plus VAT) per pane for laminated glass retrofit in Poole, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.
A laminated glass retrofit replaces the glass in frames you already have with laminated glass or laminated sealed units, so an existing building gets much more resistance to break-in without the cost and disruption of new windows. It suits homes, offices and shops where the frames are still sound.
Glass and fitting options
- Matched to existing rebate depth and beads
- Laminated single panes or laminated sealed units
- Pane-by-pane record of glass fitted
- Security tape and bead clips where needed
- Phased work by elevation or floor
- Hinge, stay and roller adjustment after fitting
Fitting in Poole and nearby
From the BH15 district we also cover Bournemouth (5 miles) and Christchurch (9 miles). Survey dates depend on installer availability.
Dorset covers Bournemouth and Poole's seafront hotels, offices and shopping streets, Georgian fronts in Weymouth, and stone market towns such as Dorchester, Bridport and Sherborne.
Common uses:
- Shops wanting more security without a new frontage
- Homes with sound uPVC or aluminium windows
- Buildings where frames are too new to replace
- Blocks of flats with communal glazing
What to think about first
Class of glass
P2A suits most homes and offices. Shops and cash areas may need P4A or anti-bandit classes.
Frame condition
If a frame is too shallow, damaged or weak, we will say so rather than fit heavier glass into it.
Consents and safety: England
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
Replacing glass in an existing frame
Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.
How it works
- Tell us about the glazing
- Survey, measuring and frame check
- Written quote naming the glass
- Fitting and handover
Laminated glass retrofit in Poole: questions
Can you survey in Poole and nearby towns?
Yes. Surveys in Poole, Bournemouth and Christchurch are booked around installer availability.
Do I need permission to change the glass?
Changing glass in existing frames is generally treated as a repair. Listed buildings may still need listed building consent, so check with the council.
Can you do the work in phases?
Yes. Many customers start with the most exposed windows and do the rest later.
Is retrofitting cheaper than new windows?
Usually, yes, because frames, plastering and making good are not involved. It only makes sense where the frames are sound.
Laminated glass retrofit in nearby towns
- Bournemouth5 miles
- Christchurch9 miles
- New Milton14 miles
- Dorchester20 miles
- Weymouth22 miles
- Shaftesbury22 miles
Other glazing in Poole
- Security double-glazed units
- Shopfront security glass
- Security glass for doors
- Security window film
- Commercial reglazing
- Laminated security glass
Get a guide price now and book your free survey in Poole.