What should security glass for doors cost in Reigate?
As a guide, allow £150 to £510 including VAT (£125 to £425 plus VAT) per door for security glass for doors in Reigate, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.
Security glass for doors replaces the glazed panel in a front, back or side door with laminated safety glass, usually in a sealed unit with a toughened outer pane. It stops the common trick of breaking the glass to reach in and turn a key or thumb-turn left in the lock.
What you can specify
- Internal beads or security tape so glass is much harder to remove from outside
- Clear, obscure and decorative designs
- Safety glass suitable for critical locations
- Laminated inner pane with toughened outer pane
- Laminated backing for leaded and bevelled panels
- Works with timber, uPVC, composite and aluminium doors
Fitting in Reigate and nearby
We arrange surveys and fitting in Reigate and across the RH2 postcode district, as well as in nearby Redhill (2 miles) and Horley (5 miles). Dates depend on installer availability.
Surrey's commuter towns such as Guildford, Woking and Epsom mix Victorian and inter-war houses with modern glazed offices, while Farnham and Godalming have extensive conservation areas.
Good candidates for security glass for doors:
- Doors with a thumb-turn lock near the glass
- Kitchen and utility doors onto the garden
- Front doors with glazed side panels
- Back and side doors with a large glazed panel
Before the glass is ordered
Thumb-turns and keys
Laminated glass makes reaching a thumb-turn far harder. Keeping keys away from the door helps too.
Keep the design
Most decorative glass can be copied or rebuilt with a laminated backing pane, so the door looks the same.
Glazing rules in England
Security rules for new homes
Approved Document Q has applied to new homes in England since 1 October 2015. Easily accessible doors and windows, meaning any part within 2 m vertically of the ground or another accessible surface, should meet PAS 24 or an equivalent, and glazing in doors and in windows within 400 mm of a door should be laminated to at least BS EN 356 P1A. It does not apply when you change the glass in an existing home, although it is a sensible benchmark.
Replacing glass in an existing frame
Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.
How it works
- Send sizes or use the quote tool
- Free survey at your Reigate address
- Fixed price in writing
- Glass made, then fitted
Security glass for doors in Reigate: questions
Do you cover Redhill as well as Reigate?
Yes. As well as Reigate, we can arrange surveys in nearby Redhill, Horley and Banstead. Dates depend on installer availability.
Does door glass have to be safety glass?
Yes. Glass in doors up to 1,500 mm from the floor, and in side panels within 300 mm of the door edge, counts as a critical location and needs safety glass or protection.
Will new door glass affect my door's warranty?
If the door is still under its maker's warranty, check their terms first. We will tell you if the door needs the maker's own glass.
Can you keep my stained or leaded glass design?
Usually. We add a laminated pane behind the decorative glass inside the sealed unit, or have a matching unit made.
Security glass for doors in nearby towns
Other glazing in Reigate
- Patio and bifold door security glass
- Broken glass replacement
- Commercial reglazing
- Anti-ram-raid glazing
- Counter and reception security screens
- Toughened safety glass
Ready for a price? Use the form or call 0800 088 6248.
