Blast-resistant glazing in Gateshead

What is the price of blast-resistant glazing in Gateshead?

Our guide range for blast-resistant glazing in Gateshead is £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What goes into blast-resistant glazing

Anti-shatter film with edge-retention systems for existing windows
Work planned from the threat assessment and engineer's design
Laminated glass with thick or stiff interlayers
Manufacturer's test evidence supplied with your quote
Deep-bite frames and structural silicone or mechanical retention
Sealed units with a laminated inner pane

Fitting in Gateshead and nearby

Surveys in Gateshead (NE8) are booked around installer availability. We also cover nearby Newcastle upon Tyne (1 mile), Felling (1 mile) and Wallsend (3 miles).

Tyne and Wear covers Newcastle's Grainger Town stone streets and quayside offices, the town centres of Sunderland and Gateshead, and large inter-war and post-war housing estates.

This glazing suits:

Laboratories and industrial sites with process risks
Government, council and civic buildings
Offices in city centres and near potential targets
Transport hubs, venues and stadium frontages

Questions we will ask at the survey

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Building regulations and safety in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

How it works

Send sizes or use the quote tool
Free survey at your Gateshead address
Fixed price in writing
Glass made, then fitted

Blast-resistant glazing in Gateshead: questions

Can you survey in Gateshead and nearby towns?

Yes. Surveys in Gateshead, Newcastle upon Tyne and Felling are booked around installer availability.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Gateshead

Ready for a price? Use the form or call 0800 088 6248.