Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · England

Blast-resistant glazing in Tyne and Wear

We supply and fit blast-resistant glazing in towns across Tyne and Wear, including Newcastle upon Tyne, Sunderland and South Shields. Every pane is measured on site.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Tyne and Wear

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

How much does blast-resistant glazing cost in Tyne and Wear?

Typical prices for blast-resistant glazing in Tyne and Wear are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What goes into blast-resistant glazing

  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Blast-resistant net curtains as a fragment-catching layer
  • Laminated glass with thick or stiff interlayers
  • Manufacturer's test evidence supplied with your quote
  • Sealed units with a laminated inner pane
  • Anti-shatter film with edge-retention systems for existing windows

Covering Tyne and Wear

We can arrange surveys and fitting anywhere in Tyne and Wear, including Newcastle upon Tyne and Sunderland. Dates depend on installer availability. Choose your town below for local details.

Tyne and Wear covers Newcastle's Grainger Town stone streets and quayside offices, the town centres of Sunderland and Gateshead, and large inter-war and post-war housing estates.

Typical places for blast-resistant glazing:

  • Embassies, courts and police premises
  • Government, council and civic buildings
  • Laboratories and industrial sites with process risks
  • Offices in city centres and near potential targets

Towns in Tyne and Wear

Things to decide before you order

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Rules that apply in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

How it works

  1. Guide price online or by phone
  2. Survey in Tyne and Wear
  3. Accept the fixed quote
  4. Fitted by glaziers working under our contract

Blast-resistant glazing in Tyne and Wear: questions

Which towns in Tyne and Wear do you cover?

We can arrange work anywhere in Tyne and Wear, including Newcastle upon Tyne, Sunderland, South Shields, Gateshead and Washington, and in other towns across the area.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Other glazing in Tyne and Wear

Tell us about the glazing and we will come back with a guide price.

Get a guide price for Tyne and Wear

Free survey for new installations across Tyne and Wear. Fixed price in writing before anything is ordered.

CallGet a price