Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · KT17 · Surrey

Blast-resistant glazing in Epsom

Blast-resistant glazing in Epsom and the KT17 area, measured on site and priced in writing before any glass is ordered.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Epsom

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What is the price of blast-resistant glazing in Epsom?

Guide prices for blast-resistant glazing in Epsom are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Options for blast-resistant glazing in Epsom

  • Manufacturer's test evidence supplied with your quote
  • Anti-shatter film with edge-retention systems for existing windows
  • Blast-resistant net curtains as a fragment-catching layer
  • Work planned from the threat assessment and engineer's design
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Laminated glass with thick or stiff interlayers

Fitting in Epsom and nearby

Epsom is about 15 miles from Guildford, the main centre for Surrey. We can survey and fit across the KT17 district and in nearby places such as Ewell and Banstead.

Surrey's commuter towns such as Guildford, Woking and Epsom mix Victorian and inter-war houses with modern glazed offices, while Farnham and Godalming have extensive conservation areas.

This glazing suits:

  • Laboratories and industrial sites with process risks
  • Offices in city centres and near potential targets
  • Transport hubs, venues and stadium frontages
  • Embassies, courts and police premises

Questions we will ask at the survey

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Building regulations and safety in England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

  1. Tell us about the glazing
  2. Survey, measuring and frame check
  3. Written quote naming the glass
  4. Fitting and handover

Blast-resistant glazing in Epsom: questions

Which areas near Epsom do you cover?

We can arrange work in Epsom and in nearby Ewell (2 miles), Banstead (3 miles) and Sutton (3 miles). Dates depend on installer availability.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Blast-resistant glazing in nearby towns

Other glazing in Epsom

Get a guide price now and book your free survey in Epsom.

Get a guide price for Epsom

Free survey for new installations in Epsom and the KT17 area. Fixed price in writing before anything is ordered.

CallGet a price