Blast-resistant glazing in Banstead

Blast-resistant glazing in Banstead: what will it cost?

Our guide range for blast-resistant glazing in Banstead is £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Glass and fitting options

Laminated glass with thick or stiff interlayers
Anti-shatter film with edge-retention systems for existing windows
Manufacturer's test evidence supplied with your quote
Sealed units with a laminated inner pane
Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
Blast-resistant net curtains as a fragment-catching layer

Fitting in Banstead and nearby

From the SM7 district we also cover Sutton (2 miles) and Ewell (3 miles). Survey dates depend on installer availability.

Surrey's commuter towns such as Guildford, Woking and Epsom mix Victorian and inter-war houses with modern glazed offices, while Farnham and Godalming have extensive conservation areas.

Typical settings for blast-resistant glazing:

Government, council and civic buildings
Transport hubs, venues and stadium frontages
Offices in city centres and near potential targets
Laboratories and industrial sites with process risks

Getting the right glass for your building

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

What the rules say in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Blast-resistant glazing in Banstead: questions

Can you survey in Banstead and nearby towns?

Yes. Surveys in Banstead, Sutton and Ewell are booked around installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Blast-resistant glazing in nearby towns

Other glazing in Banstead

Start with a guide price online, then we survey and fix the price in writing.