Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · IP32 · Suffolk

Blast-resistant glazing in Bury St Edmunds

Blast-resistant glazing for shops, offices and other business premises in Bury St Edmunds, with the glass makeup confirmed in writing before it is ordered.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Bury St Edmunds

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

Blast-resistant glazing in Bury St Edmunds: what will it cost?

As a guide, allow £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Bury St Edmunds, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Glass and fitting options

  • Sealed units with a laminated inner pane
  • Laminated glass with thick or stiff interlayers
  • Manufacturer's test evidence supplied with your quote
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Work planned from the threat assessment and engineer's design
  • Deep-bite frames and structural silicone or mechanical retention

Fitting in Bury St Edmunds and nearby

From the IP32 district we also cover Thetford (12 miles) and Stowmarket (13 miles). Survey dates depend on installer availability.

Suffolk ranges from Ipswich's waterfront offices and town-centre shops to timber-framed and Georgian streets in Bury St Edmunds, Lavenham and Woodbridge, and coastal Lowestoft and Felixstowe.

Typical settings for blast-resistant glazing:

  • Embassies, courts and police premises
  • Transport hubs, venues and stadium frontages
  • Laboratories and industrial sites with process risks
  • Government, council and civic buildings

Getting the right glass for your building

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

What the rules say in England

England

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

  1. Tell us about the glazing
  2. Survey, measuring and frame check
  3. Written quote naming the glass
  4. Fitting and handover

Blast-resistant glazing in Bury St Edmunds: questions

Can you survey in Bury St Edmunds and nearby towns?

Yes. Surveys in Bury St Edmunds, Thetford and Stowmarket are booked around installer availability.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Blast-resistant glazing in nearby towns

Other glazing in Bury St Edmunds

Get a guide price now and book your free survey in Bury St Edmunds.

Get a guide price for Bury St Edmunds

Free survey for new installations in Bury St Edmunds and the IP32 area. Fixed price in writing before anything is ordered.

CallGet a price