Blast-resistant glazing in Didcot

What should blast-resistant glazing cost in Didcot?

Typical prices for blast-resistant glazing in Didcot are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Choices you can make

Deep-bite frames and structural silicone or mechanical retention
Laminated glass with thick or stiff interlayers
Work planned from the threat assessment and engineer's design
Manufacturer's test evidence supplied with your quote
Sealed units with a laminated inner pane
Anti-shatter film with edge-retention systems for existing windows

Fitting in Didcot and nearby

We can arrange blast-resistant glazing anywhere in Didcot, and in nearby Abingdon, Oxford and Thatcham. Tell us your postcode and we will offer dates.

Oxfordshire's college city and stone market towns such as Woodstock, Witney and Henley-on-Thames sit alongside business and science parks around Abingdon, Didcot and Bicester.

Good candidates for blast-resistant glazing:

Embassies, courts and police premises
Transport hubs, venues and stadium frontages
Offices in city centres and near potential targets
Government, council and civic buildings

Before the glass is ordered

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Glazing rules in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Send sizes or use the quote tool
Free survey at your Didcot address
Fixed price in writing
Glass made, then fitted

Blast-resistant glazing in Didcot: questions

Which areas near Didcot do you cover?

We can arrange work in Didcot and in nearby Abingdon (5 miles), Oxford (10 miles) and Thatcham (14 miles). Dates depend on installer availability.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Didcot

Ready for a price? Use the form or call 0800 088 6248.

Free quote in Didcot