Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · RG14 · Berkshire

Blast-resistant glazing in Newbury

Need blast-resistant glazing in Newbury? Send sizes or photos for a guide price, then we survey and confirm a fixed price.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Newbury

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

Blast-resistant glazing in Newbury: what will it cost?

Expect £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Newbury. The written quote names the glass makeup, the price and the lead time before you commit.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Choices you can make

  • Deep-bite frames and structural silicone or mechanical retention
  • Work planned from the threat assessment and engineer's design
  • Anti-shatter film with edge-retention systems for existing windows
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Sealed units with a laminated inner pane
  • Laminated glass with thick or stiff interlayers

Fitting in Newbury and nearby

We can arrange blast-resistant glazing anywhere in Newbury, and in nearby Thatcham, Basingstoke and Didcot. Tell us your postcode and we will offer dates.

Berkshire pairs the glass-fronted offices of Reading, Slough and Bracknell with Victorian and Edwardian housing and listed riverside buildings in Windsor and Eton.

Typical settings for blast-resistant glazing:

  • Laboratories and industrial sites with process risks
  • Embassies, courts and police premises
  • Offices in city centres and near potential targets
  • Transport hubs, venues and stadium frontages

Getting the right glass for your building

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

What the rules say in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Newbury address
  3. Fixed price in writing
  4. Glass made, then fitted

Blast-resistant glazing in Newbury: questions

Which areas near Newbury do you cover?

We can arrange work in Newbury and in nearby Thatcham (3 miles), Basingstoke (14 miles) and Didcot (15 miles). Dates depend on installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Newbury

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Newbury

Free survey for new installations in Newbury and the RG14 area. Fixed price in writing before anything is ordered.

CallGet a price