Blast-resistant glazing in Coalville

How much does blast-resistant glazing cost in Coalville?

Typical prices for blast-resistant glazing in Coalville are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Glass and fitting options

Work planned from the threat assessment and engineer's design
Deep-bite frames and structural silicone or mechanical retention
Sealed units with a laminated inner pane
Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
Blast-resistant net curtains as a fragment-catching layer
Laminated glass with thick or stiff interlayers

Fitting in Coalville and nearby

From the LE67 district we also cover Loughborough (8 miles) and Swadlincote (9 miles). Survey dates depend on installer availability.

Leicestershire combines Leicester's city-centre and suburban shopping streets and Victorian terraces with market towns such as Loughborough, Hinckley and Market Harborough.

Typical places for blast-resistant glazing:

Embassies, courts and police premises
Laboratories and industrial sites with process risks
Offices in city centres and near potential targets
Transport hubs, venues and stadium frontages

Things to decide before you order

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Rules that apply in England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Blast-resistant glazing in Coalville: questions

Can you survey in Coalville and nearby towns?

Yes. Surveys in Coalville, Loughborough and Swadlincote are booked around installer availability.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Coalville

Get a guide price now and book your free survey in Coalville.