Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · SO45 · Hampshire

Blast-resistant glazing in Hythe

Thinking about blast-resistant glazing in Hythe? We measure, check the frames and recommend the glass, then fix the price in writing.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Hythe

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

How much should I budget for blast-resistant glazing in Hythe?

As a guide, allow £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Hythe, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What you can specify

  • Work planned from the threat assessment and engineer's design
  • Anti-shatter film with edge-retention systems for existing windows
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Manufacturer's test evidence supplied with your quote
  • Blast-resistant net curtains as a fragment-catching layer
  • Laminated glass with thick or stiff interlayers

Fitting in Hythe and nearby

We arrange surveys and fitting in Hythe and across the SO45 postcode district, as well as in nearby Southampton (3 miles) and Totton (6 miles). Dates depend on installer availability.

Hampshire covers the port-city shops and offices of Southampton and Portsmouth, Winchester's listed centre, and commuter estates around Basingstoke, Eastleigh and Fareham.

Common uses:

  • Laboratories and industrial sites with process risks
  • Transport hubs, venues and stadium frontages
  • Government, council and civic buildings
  • Offices in city centres and near potential targets

What to think about first

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Consents and safety: England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

  1. Guide price online or by phone
  2. Survey in Hythe
  3. Accept the fixed quote
  4. Fitted by glaziers working under our contract

Blast-resistant glazing in Hythe: questions

Do you cover Southampton as well as Hythe?

Yes. As well as Hythe, we can arrange surveys in nearby Southampton, Totton and Eastleigh. Dates depend on installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Blast-resistant glazing in nearby towns

Other glazing in Hythe

Tell us about the glazing and we will come back with a guide price.

Get a guide price for Hythe

Free survey for new installations in Hythe and the SO45 area. Fixed price in writing before anything is ordered.

CallGet a price