Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · HA0 · Greater London

Blast-resistant glazing in Wembley

Thinking about blast-resistant glazing in Wembley? We measure, check the frames and recommend the glass, then fix the price in writing.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Wembley

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

How much should I budget for blast-resistant glazing in Wembley?

Budget £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Wembley, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What you can specify

  • Manufacturer's test evidence supplied with your quote
  • Sealed units with a laminated inner pane
  • Deep-bite frames and structural silicone or mechanical retention
  • Work planned from the threat assessment and engineer's design
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Blast-resistant net curtains as a fragment-catching layer

Fitting in Wembley and nearby

We arrange surveys and fitting in Wembley and across the HA0 postcode district, as well as in nearby Harrow (2 miles) and Greenford (3 miles). Dates depend on installer availability.

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

Common uses:

  • Laboratories and industrial sites with process risks
  • Offices in city centres and near potential targets
  • Transport hubs, venues and stadium frontages
  • Embassies, courts and police premises

What to think about first

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Consents and safety: England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Wembley address
  3. Fixed price in writing
  4. Glass made, then fitted

Blast-resistant glazing in Wembley: questions

Do you cover Harrow as well as Wembley?

Yes. As well as Wembley, we can arrange surveys in nearby Harrow, Greenford and Willesden. Dates depend on installer availability.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Wembley

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Wembley

Free survey for new installations in Wembley and the HA0 area. Fixed price in writing before anything is ordered.

CallGet a price