What is the price of blast-resistant glazing in Peckham?
Typical prices for blast-resistant glazing in Peckham are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.
Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.
Glass and fitting options
- Sealed units with a laminated inner pane
- Anti-shatter film with edge-retention systems for existing windows
- Deep-bite frames and structural silicone or mechanical retention
- Manufacturer's test evidence supplied with your quote
- Blast-resistant net curtains as a fragment-catching layer
- Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
Fitting in Peckham and nearby
From the SE15 district we also cover Brixton (2 miles) and Greenwich (3 miles). Survey dates depend on installer availability.
Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.
This glazing suits:
- Embassies, courts and police premises
- Government, council and civic buildings
- Laboratories and industrial sites with process risks
- Offices in city centres and near potential targets
Questions we will ask at the survey
Who sets the level
The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.
Fragment hazard
Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.
Building regulations and safety in England
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.
Planning permission
Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.
How it works
- Postcode and a few photos
- On-site survey
- Fixed written price and lead time
- Fit, check and explain
Blast-resistant glazing in Peckham: questions
Can you survey in Peckham and nearby towns?
Yes. Surveys in Peckham, Brixton and Greenwich are booked around installer availability.
Is blast film enough on its own?
Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.
Who decides what level of protection we need?
Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.
What does ER1 to ER4 mean?
They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.
Blast-resistant glazing in nearby towns
Other glazing in Peckham
- Laminated security glass
- Shopfront security glass
- Anti-ram-raid glazing
- Security window film
- Security glazed doors and screens
- Kiosk and booth security glazing
Start with a guide price online, then we survey and fix the price in writing.