Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · BN2 · East Sussex

Blast-resistant glazing in Brighton

Blast-resistant glazing in Brighton and the BN2 area, measured on site and priced in writing before any glass is ordered.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Brighton

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What is the price of blast-resistant glazing in Brighton?

Our guide range for blast-resistant glazing in Brighton is £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Specification at a glance

  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Sealed units with a laminated inner pane
  • Manufacturer's test evidence supplied with your quote
  • Anti-shatter film with edge-retention systems for existing windows
  • Work planned from the threat assessment and engineer's design
  • Deep-bite frames and structural silicone or mechanical retention

Fitting in Brighton and nearby

We arrange surveys and fitting across Brighton and the BN2 postcode district, and in nearby Hove (1 mile), Portslade (3 miles) and Burgess Hill.

East Sussex mixes the Regency bow-fronted terraces and busy shopping lanes of Brighton and Hove with Victorian seafronts in Eastbourne and Hastings and historic Lewes and Rye.

This glazing suits:

  • Transport hubs, venues and stadium frontages
  • Laboratories and industrial sites with process risks
  • Embassies, courts and police premises
  • Government, council and civic buildings

Questions we will ask at the survey

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Building regulations and safety in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

  1. Tell us about the glazing
  2. Survey, measuring and frame check
  3. Written quote naming the glass
  4. Fitting and handover

Blast-resistant glazing in Brighton: questions

Do you cover Hove as well as Brighton?

Yes. As well as Brighton, we can arrange surveys in nearby Hove, Portslade and Burgess Hill. Dates depend on installer availability.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Brighton

Get a guide price now and book your free survey in Brighton.

Get a guide price for Brighton

Free survey for new installations in Brighton and the BN2 area. Fixed price in writing before anything is ordered.

CallGet a price