Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · SL9 · Buckinghamshire

Blast-resistant glazing in Gerrards Cross

Need blast-resistant glazing in Gerrards Cross? Send sizes or photos for a guide price, then we survey and confirm a fixed price.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Gerrards Cross

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

Blast-resistant glazing in Gerrards Cross: what will it cost?

Typical prices for blast-resistant glazing in Gerrards Cross are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What goes into blast-resistant glazing

  • Blast-resistant net curtains as a fragment-catching layer
  • Work planned from the threat assessment and engineer's design
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Deep-bite frames and structural silicone or mechanical retention
  • Anti-shatter film with edge-retention systems for existing windows
  • Sealed units with a laminated inner pane

Fitting in Gerrards Cross and nearby

Surveys in Gerrards Cross (SL9) are booked around installer availability. We also cover nearby Chalfont St Peter (2 miles), Uxbridge (4 miles) and Rickmansworth (5 miles).

Milton Keynes' glass-fronted shopping centre and business districts contrast with Buckinghamshire's older towns, where Aylesbury, Amersham and Marlow keep many period shopfronts.

Typical settings for blast-resistant glazing:

  • Laboratories and industrial sites with process risks
  • Transport hubs, venues and stadium frontages
  • Government, council and civic buildings
  • Offices in city centres and near potential targets

Getting the right glass for your building

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

What the rules say in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

How it works

  1. Guide price online or by phone
  2. Survey in Gerrards Cross
  3. Accept the fixed quote
  4. Fitted by glaziers working under our contract

Blast-resistant glazing in Gerrards Cross: questions

Can you survey in Gerrards Cross and nearby towns?

Yes. Surveys in Gerrards Cross, Chalfont St Peter and Uxbridge are booked around installer availability.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Gerrards Cross

Tell us about the glazing and we will come back with a guide price.

Get a guide price for Gerrards Cross

Free survey for new installations in Gerrards Cross and the SL9 area. Fixed price in writing before anything is ordered.

CallGet a price