Anti-bandit glass in Brighton: what will it cost?
As a guide, allow £450 to £2,995 plus VAT (£540 to £3,594 inc VAT) per pane for anti-bandit glass in Brighton, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.
Anti-bandit glass is a heavy laminated glass built from several sheets and interlayers to resist a determined manual attack with tools. Under BS EN 356 it is classed P6B, P7B or P8B by how many hammer and axe strikes a machine needs to cut a 400 by 400 mm hole through it. The class belongs to the manufacturer's tested makeup, and their test evidence comes with your quote.
Glass and fitting options
- BS EN 356 classes P6B, P7B and P8B
- Can be built into a sealed unit for thermal performance
- Single panes for shopfronts, screens and doors
- Manufacturer's test evidence supplied with your quote
- Multi-ply makeups with several thick interlayers
- Low-iron glass to keep thick panes clear
Fitting in Brighton and nearby
Surveys in Brighton (BN2) are booked around installer availability, as they are in nearby Hove (1 mile) and Portslade (3 miles).
East Sussex mixes the Regency bow-fronted terraces and busy shopping lanes of Brighton and Hove with Victorian seafronts in Eastbourne and Hastings and historic Lewes and Rye.
Typical settings for anti-bandit glass:
- Pharmacies with controlled drug storage
- Reception screens in higher-risk premises
- Phone, electronics and designer retailers
- Cash offices and counting rooms
Getting the right glass for your building
P6B, P7B or P8B
P6B is the usual step up for high-value retail. P7B and P8B are chosen where a risk assessment or insurer points to a sustained, equipped attack.
Weight and handling
Large anti-bandit panes can weigh several hundred kilograms. Fitting may need lifting equipment, extra installers and a planned slot outside trading hours.
What the rules say in England
Insurer requirements
Insurers set their own conditions for shops, offices, stock and cash, and some name a glazing class such as BS EN 356 P6B in the policy wording. Ask for that wording in writing before you order. The insurer decides whether the glass meets their policy; we provide the glass manufacturer's test evidence with the quote.
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.
How it works
- Tell us about the glazing
- Survey, measuring and frame check
- Written quote naming the glass
- Fitting and handover
Anti-bandit glass in Brighton: questions
Can you survey in Brighton and nearby towns?
Yes. Surveys in Brighton, Hove and Portslade are booked around installer availability.
Is anti-bandit glass the same as bullet-resistant glass?
No. Anti-bandit glass is tested against manual attack under BS EN 356. Bullet-resistant glass is tested against firearms under BS EN 1063, and is thicker and heavier again.
What is the difference between anti-bandit and laminated glass?
All anti-bandit glass is laminated, but not all laminated glass is anti-bandit. The term is used for the P6B to P8B classes, which resist hammer and axe attack rather than just a dropped weight.
How thick is anti-bandit glass?
It depends on the manufacturer's makeup for each class. P6B is often around 11.5 mm and P8B commonly 20 mm or more. We quote the tested makeup for the class you need.
Anti-bandit glass in nearby towns
Other glazing in Brighton
- Laminated security glass
- Security window film
- Broken glass replacement
- Security glazed doors and screens
- Commercial reglazing
- Patio and bifold door security glass
Get a guide price now and book your free survey in Brighton.