Anti-bandit glass in Buckinghamshire

What should anti-bandit glass cost in Buckinghamshire?

Typical prices for anti-bandit glass in Buckinghamshire are £450 to £2,995 plus VAT (£540 to £3,594 inc VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Anti-bandit glass is a heavy laminated glass built from several sheets and interlayers to resist a determined manual attack with tools. Under BS EN 356 it is classed P6B, P7B or P8B by how many hammer and axe strikes a machine needs to cut a 400 by 400 mm hole through it. The class belongs to the manufacturer's tested makeup, and their test evidence comes with your quote.

Choices you can make

Internal beads and anti-tamper fixings
Framing upgrades where existing frames are too light
Can be built into a sealed unit for thermal performance
Multi-ply makeups with several thick interlayers
Low-iron glass to keep thick panes clear
BS EN 356 classes P6B, P7B and P8B

Covering Buckinghamshire

We can arrange surveys and fitting anywhere in Buckinghamshire, including Milton Keynes and High Wycombe. Dates depend on installer availability. Choose your town below for local details.

Milton Keynes' glass-fronted shopping centre and business districts contrast with Buckinghamshire's older towns, where Aylesbury, Amersham and Marlow keep many period shopfronts.

Good candidates for anti-bandit glass:

Pharmacies with controlled drug storage
Jewellers, watch dealers and pawnbrokers
Cash offices and counting rooms
Phone, electronics and designer retailers

Towns in Buckinghamshire

Before the glass is ordered

Glass alone or glass and frame

The class only means something if the frame, beads and fixings hold the glass for as long as the glass resists. We will tell you if the frame needs replacing.

P6B, P7B or P8B

P6B is the usual step up for high-value retail. P7B and P8B are chosen where a risk assessment or insurer points to a sustained, equipped attack.

Glazing rules in England

England

Insurer requirements

Insurers set their own conditions for shops, offices, stock and cash, and some name a glazing class such as BS EN 356 P6B in the policy wording. Ask for that wording in writing before you order. The insurer decides whether the glass meets their policy; we provide the glass manufacturer's test evidence with the quote.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Send sizes or use the quote tool
Free survey at your Buckinghamshire address
Fixed price in writing
Glass made, then fitted

Anti-bandit glass in Buckinghamshire: questions

Which towns in Buckinghamshire do you cover?

We can arrange work anywhere in Buckinghamshire, including Milton Keynes, High Wycombe, Aylesbury, Bletchley and Amersham, and in other towns across the area.

What is the difference between anti-bandit and laminated glass?

All anti-bandit glass is laminated, but not all laminated glass is anti-bandit. The term is used for the P6B to P8B classes, which resist hammer and axe attack rather than just a dropped weight.

Can anti-bandit glass go into my existing shopfront?

Sometimes. Many older shopfront frames are too shallow or too light for thick glass. We check the rebate depth, bead strength and fixings, and price new framing if the existing frame would be the weak point.

Is anti-bandit glass the same as bullet-resistant glass?

No. Anti-bandit glass is tested against manual attack under BS EN 356. Bullet-resistant glass is tested against firearms under BS EN 1063, and is thicker and heavier again.

Other glazing in Buckinghamshire

Ready for a price? Use the form or call 0800 088 6248.

Free quote in Buckinghamshire