Toughened safety glass in Wiltshire

How much does toughened safety glass cost in Wiltshire?

As a guide, allow £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Wiltshire, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Glass and fitting options

Heat-soaked option for large and overhead panes
Clear, tinted, obscure, low-iron and sandblasted finishes
Made to BS EN 12150 and marked for identification
Made to measure for each opening
Breaks into small blunt fragments
Holes, notches and polished edges for frameless fittings

Covering Wiltshire

We can arrange surveys and fitting anywhere in Wiltshire, including Swindon and Salisbury. Dates depend on installer availability. Choose your town below for local details.

Wiltshire combines Salisbury's medieval and Georgian centre, Swindon's modern town centre, offices and estates, and stone market towns such as Marlborough, Devizes and Bradford-on-Avon.

Typical places for toughened safety glass:

Glazed doors and side panels
Balustrades in a laminated toughened makeup
Panes below 800 mm in homes and offices
Shower screens and splashbacks

Towns in Wiltshire

Things to decide before you order

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Rules that apply in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Toughened safety glass in Wiltshire: questions

Which towns in Wiltshire do you cover?

We can arrange work anywhere in Wiltshire, including Swindon, Salisbury, Trowbridge, Chippenham and Calne, and in other towns across the area.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Other glazing in Wiltshire

Get a guide price now and book your free survey in Wiltshire.

Free quote in Wiltshire