Toughened safety glass in Pudsey

Toughened safety glass in Pudsey: what will it cost?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Pudsey. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Specification at a glance

Holes, notches and polished edges for frameless fittings
Made to measure for each opening
Four to five times the strength of annealed glass
Heat-soaked option for large and overhead panes
Made to BS EN 12150 and marked for identification
Single panes or the outer pane of a sealed unit

Fitting in Pudsey and nearby

Whether you are in central Pudsey or at the edge of the LS28 district, we can arrange a survey. Nearby Bradford and Morley are covered too.

West Yorkshire mixes the offices and Victorian arcades of Leeds with stone terraces and mill buildings in Bradford, Halifax and Huddersfield, and Wakefield's town-centre retail.

Typical settings for toughened safety glass:

Panes below 800 mm in homes and offices
Balustrades in a laminated toughened makeup
Shower screens and splashbacks
Frameless office partitions and doors

Getting the right glass for your building

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

What the rules say in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Toughened safety glass in Pudsey: questions

Do you cover Bradford as well as Pudsey?

Yes. As well as Pudsey, we can arrange surveys in nearby Bradford, Morley and Leeds. Dates depend on installer availability.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Pudsey

Start with a guide price online, then we survey and fix the price in writing.