Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Toughened safety glass · CV12 · Warwickshire

Toughened safety glass in Bedworth

From one pane to a whole building, toughened safety glass in Bedworth is measured on site and priced in writing after a free survey.

Frameless toughened glass partition and door in a bright office corridor
Free survey

Free quote in Bedworth

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What is the price of toughened safety glass in Bedworth?

Our guide range for toughened safety glass in Bedworth is £114 to £414 including VAT (£95 to £345 plus VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

  • Four to five times the strength of annealed glass
  • Holes, notches and polished edges for frameless fittings
  • Made to BS EN 12150 and marked for identification
  • Breaks into small blunt fragments
  • Heat-soaked option for large and overhead panes
  • Clear, tinted, obscure, low-iron and sandblasted finishes

Fitting in Bedworth and nearby

Surveys in Bedworth (CV12) are booked around installer availability. We also cover nearby Nuneaton (3 miles), Coventry (5 miles) and Hinckley (6 miles).

Warwickshire has the listed timber-framed centres of Warwick and Stratford-upon-Avon, Regency terraces in Leamington Spa, and Nuneaton, Rugby and business parks near the M40 and M6.

This glazing suits:

  • Frameless office partitions and doors
  • Balustrades in a laminated toughened makeup
  • Glazed doors and side panels
  • Shower screens and splashbacks

Questions we will ask at the survey

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Building regulations and safety in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Bedworth address
  3. Fixed price in writing
  4. Glass made, then fitted

Toughened safety glass in Bedworth: questions

Can you survey in Bedworth and nearby towns?

Yes. Surveys in Bedworth, Nuneaton and Coventry are booked around installer availability.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Toughened safety glass in nearby towns

Other glazing in Bedworth

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Bedworth

Free survey for new installations in Bedworth and the CV12 area. Fixed price in writing before anything is ordered.

CallGet a price