Toughened safety glass in Godalming

How much does toughened safety glass cost in Godalming?

Budget £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Godalming, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

Made to BS EN 12150 and marked for identification
Single panes or the outer pane of a sealed unit
Holes, notches and polished edges for frameless fittings
Clear, tinted, obscure, low-iron and sandblasted finishes
Made to measure for each opening
Four to five times the strength of annealed glass

Fitting in Godalming and nearby

Surveys in Godalming (GU7) are booked around installer availability. We also cover nearby Guildford (4 miles), Aldershot (8 miles) and Farnham (8 miles).

Surrey's commuter towns such as Guildford, Woking and Epsom mix Victorian and inter-war houses with modern glazed offices, while Farnham and Godalming have extensive conservation areas.

Typical places for toughened safety glass:

Glazed doors and side panels
Shower screens and splashbacks
Panes below 800 mm in homes and offices
Frameless office partitions and doors

Things to decide before you order

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Rules that apply in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Send sizes or use the quote tool
Free survey at your Godalming address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Godalming: questions

Can you survey in Godalming and nearby towns?

Yes. Surveys in Godalming, Guildford and Aldershot are booked around installer availability.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Godalming

Ready for a price? Use the form or call 0800 088 6248.