Toughened safety glass in Felixstowe

Toughened safety glass in Felixstowe: what will it cost?

Guide prices for toughened safety glass in Felixstowe are £114 to £414 including VAT (£95 to £345 plus VAT) per pane for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

Made to BS EN 12150 and marked for identification
Holes, notches and polished edges for frameless fittings
Breaks into small blunt fragments
Four to five times the strength of annealed glass
Made to measure for each opening
Clear, tinted, obscure, low-iron and sandblasted finishes

Fitting in Felixstowe and nearby

We arrange surveys and fitting in Felixstowe and across the IP11 postcode district, as well as in nearby Harwich (3 miles) and Ipswich (11 miles). Dates depend on installer availability.

Suffolk ranges from Ipswich's waterfront offices and town-centre shops to timber-framed and Georgian streets in Bury St Edmunds, Lavenham and Woodbridge, and coastal Lowestoft and Felixstowe.

Typical settings for toughened safety glass:

Glazed doors and side panels
Shower screens and splashbacks
Balustrades in a laminated toughened makeup
Panes below 800 mm in homes and offices

Getting the right glass for your building

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

What the rules say in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Guide price online or by phone
Survey in Felixstowe
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Felixstowe: questions

Do you cover Harwich as well as Felixstowe?

Yes. As well as Felixstowe, we can arrange surveys in nearby Harwich, Ipswich and Clacton-on-Sea. Dates depend on installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Toughened safety glass in nearby towns

Other glazing in Felixstowe

Tell us about the glazing and we will come back with a guide price.