Toughened safety glass in Oxford

Toughened safety glass in Oxford: what will it cost?

Guide prices for toughened safety glass in Oxford are £114 to £414 including VAT (£95 to £345 plus VAT) per pane for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Options for toughened safety glass in Oxford

Four to five times the strength of annealed glass
Heat-soaked option for large and overhead panes
Single panes or the outer pane of a sealed unit
Made to measure for each opening
Clear, tinted, obscure, low-iron and sandblasted finishes
Holes, notches and polished edges for frameless fittings

Fitting in Oxford and nearby

We can arrange toughened safety glass across Oxford, the main centre for Oxfordshire, and in nearby towns including Abingdon, Didcot and Witney.

Oxfordshire's college city and stone market towns such as Woodstock, Witney and Henley-on-Thames sit alongside business and science parks around Abingdon, Didcot and Bicester.

Typical settings for toughened safety glass:

Frameless office partitions and doors
Balustrades in a laminated toughened makeup
Shower screens and splashbacks
Glazed doors and side panels

Getting the right glass for your building

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

What the rules say in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Toughened safety glass in Oxford: questions

Which areas near Oxford do you cover?

We can arrange work in Oxford and in nearby Abingdon (6 miles), Didcot (10 miles) and Witney (10 miles). Dates depend on installer availability.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Toughened safety glass in nearby towns

Other glazing in Oxford

Start with a guide price online, then we survey and fix the price in writing.