Toughened safety glass in Worksop

How much does toughened safety glass cost in Worksop?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Worksop. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Clear, tinted, obscure, low-iron and sandblasted finishes
Made to measure for each opening
Heat-soaked option for large and overhead panes
Four to five times the strength of annealed glass
Holes, notches and polished edges for frameless fittings
Made to BS EN 12150 and marked for identification

Fitting in Worksop and nearby

We can arrange toughened safety glass anywhere in Worksop, and in nearby Retford, Staveley and Mansfield. Tell us your postcode and we will offer dates.

Nottinghamshire mixes Nottingham's Lace Market warehouses and city-centre shops with Victorian terraces, post-war estates around Mansfield and Worksop, and Georgian Newark and Southwell.

Typical places for toughened safety glass:

Panes below 800 mm in homes and offices
Frameless office partitions and doors
Shower screens and splashbacks
Glazed doors and side panels

Things to decide before you order

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Rules that apply in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Send sizes or use the quote tool
Free survey at your Worksop address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Worksop: questions

Which areas near Worksop do you cover?

We can arrange work in Worksop and in nearby Retford (8 miles), Staveley (10 miles) and Mansfield (12 miles). Dates depend on installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Toughened safety glass in nearby towns

Other glazing in Worksop

Ready for a price? Use the form or call 0800 088 6248.