Toughened safety glass in Wellingborough

Toughened safety glass in Wellingborough: what will it cost?

Budget £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Wellingborough, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Made to BS EN 12150 and marked for identification
Heat-soaked option for large and overhead panes
Clear, tinted, obscure, low-iron and sandblasted finishes
Holes, notches and polished edges for frameless fittings
Made to measure for each opening
Single panes or the outer pane of a sealed unit

Fitting in Wellingborough and nearby

We can arrange toughened safety glass anywhere in Wellingborough, and in nearby Rushden, Kettering and Northampton. Tell us your postcode and we will offer dates.

Northamptonshire mixes Northampton's town-centre retail and Victorian shoe-trade streets with newer estates around Corby and Wellingborough and stone villages towards Oundle.

Typical settings for toughened safety glass:

Frameless office partitions and doors
Shower screens and splashbacks
Glazed doors and side panels
Balustrades in a laminated toughened makeup

Getting the right glass for your building

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

What the rules say in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Guide price online or by phone
Survey in Wellingborough
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Wellingborough: questions

Which areas near Wellingborough do you cover?

We can arrange work in Wellingborough and in nearby Rushden (4 miles), Kettering (7 miles) and Northampton (9 miles). Dates depend on installer availability.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Toughened safety glass in nearby towns

Other glazing in Wellingborough

Tell us about the glazing and we will come back with a guide price.