How much does toughened safety glass cost in Whitby?
As a guide, allow £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Whitby, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.
Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.
Choices you can make
- Heat-soaked option for large and overhead panes
- Clear, tinted, obscure, low-iron and sandblasted finishes
- Single panes or the outer pane of a sealed unit
- Made to measure for each opening
- Made to BS EN 12150 and marked for identification
- Holes, notches and polished edges for frameless fittings
Fitting in Whitby and nearby
We arrange surveys and fitting in Whitby and across the YO21 postcode district. Tell us your postcode and we will offer dates.
North Yorkshire includes York's walled city and listed streets, Harrogate's Victorian stone terraces, Middlesbrough's town centre and coastal Scarborough and Whitby.
Typical places for toughened safety glass:
- Balustrades in a laminated toughened makeup
- Shower screens and splashbacks
- Frameless office partitions and doors
- Glazed doors and side panels
Things to decide before you order
Barriers and balustrades
Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.
Toughened or laminated
Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.
Rules that apply in England
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.
How it works
- Send sizes or use the quote tool
- Free survey at your Whitby address
- Fixed price in writing
- Glass made, then fitted
Toughened safety glass in Whitby: questions
Do you cover Scarborough as well as Whitby?
Yes. As well as Whitby, we can arrange work in nearby Scarborough. Dates depend on installer availability.
Why did my toughened glass break on its own?
Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.
How can I tell if glass is toughened?
Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.
Is toughened glass a security glass?
No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.
Toughened safety glass in nearby towns
Other glazing in Whitby
- Commercial reglazing
- Security double-glazed units
- Counter and reception security screens
- Security glass for home windows
- Safety glazing for schools and public buildings
- Bullet-resistant glass
Ready for a price? Use the form or call 0800 088 6248.