Toughened safety glass in Leyland

How much should I budget for toughened safety glass in Leyland?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Leyland. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

Four to five times the strength of annealed glass
Holes, notches and polished edges for frameless fittings
Clear, tinted, obscure, low-iron and sandblasted finishes
Breaks into small blunt fragments
Made to BS EN 12150 and marked for identification
Single panes or the outer pane of a sealed unit

Fitting in Leyland and nearby

Surveys in Leyland (PR25) are booked around installer availability. We also cover nearby Chorley (4 miles), Preston (5 miles) and Blackburn (9 miles).

Lancashire pairs Victorian terraces and town-centre retail in Preston and Blackburn with Lancaster's Georgian stone streets and the seafront hotels, shops and arcades of Blackpool.

Common uses:

Frameless office partitions and doors
Panes below 800 mm in homes and offices
Shower screens and splashbacks
Balustrades in a laminated toughened makeup

What to think about first

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Consents and safety: England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Guide price online or by phone
Survey in Leyland
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Leyland: questions

Can you survey in Leyland and nearby towns?

Yes. Surveys in Leyland, Chorley and Preston are booked around installer availability.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Leyland

Tell us about the glazing and we will come back with a guide price.