Toughened safety glass in Lancaster

How much does toughened safety glass cost in Lancaster?

Our guide range for toughened safety glass in Lancaster is £114 to £414 including VAT (£95 to £345 plus VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

Heat-soaked option for large and overhead panes
Made to BS EN 12150 and marked for identification
Four to five times the strength of annealed glass
Clear, tinted, obscure, low-iron and sandblasted finishes
Made to measure for each opening
Breaks into small blunt fragments

Fitting in Lancaster and nearby

We arrange surveys and fitting in Lancaster and across the LA1 postcode district, as well as in nearby Morecambe (3 miles) and Fleetwood (12 miles). Dates depend on installer availability.

Lancashire pairs Victorian terraces and town-centre retail in Preston and Blackburn with Lancaster's Georgian stone streets and the seafront hotels, shops and arcades of Blackpool.

Typical places for toughened safety glass:

Shower screens and splashbacks
Glazed doors and side panels
Frameless office partitions and doors
Panes below 800 mm in homes and offices

Things to decide before you order

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Rules that apply in England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Send sizes or use the quote tool
Free survey at your Lancaster address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Lancaster: questions

Do you cover Morecambe as well as Lancaster?

Yes. As well as Lancaster, we can arrange surveys in nearby Morecambe, Fleetwood and Thornton-Cleveleys. Dates depend on installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Lancaster

Ready for a price? Use the form or call 0800 088 6248.