Toughened safety glass in Whitstable

How much does toughened safety glass cost in Whitstable?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Whitstable. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

Clear, tinted, obscure, low-iron and sandblasted finishes
Four to five times the strength of annealed glass
Single panes or the outer pane of a sealed unit
Heat-soaked option for large and overhead panes
Holes, notches and polished edges for frameless fittings
Breaks into small blunt fragments

Fitting in Whitstable and nearby

Surveys in Whitstable (CT5) are booked around installer availability. We also cover nearby Herne Bay (5 miles), Canterbury (6 miles) and Faversham (7 miles).

Kent ranges from Canterbury's listed city centre and the Regency fronts of Tunbridge Wells to the Medway towns, Ashford's growth estates and coastal Margate and Folkestone.

Typical places for toughened safety glass:

Shower screens and splashbacks
Balustrades in a laminated toughened makeup
Glazed doors and side panels
Panes below 800 mm in homes and offices

Things to decide before you order

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Rules that apply in England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Send sizes or use the quote tool
Free survey at your Whitstable address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Whitstable: questions

Can you survey in Whitstable and nearby towns?

Yes. Surveys in Whitstable, Herne Bay and Canterbury are booked around installer availability.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Whitstable

Ready for a price? Use the form or call 0800 088 6248.