Toughened safety glass in Hereford

How much does toughened safety glass cost in Hereford?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Hereford. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Made to measure for each opening
Single panes or the outer pane of a sealed unit
Heat-soaked option for large and overhead panes
Breaks into small blunt fragments
Clear, tinted, obscure, low-iron and sandblasted finishes
Holes, notches and polished edges for frameless fittings

Fitting in Hereford and nearby

We can arrange toughened safety glass across Hereford, the main centre for Herefordshire, and in nearby towns including Ross-on-Wye, Leominster and Malvern.

Herefordshire is largely rural, with Hereford's cathedral-city centre, black-and-white timber-framed villages, and market towns such as Leominster and Ledbury with historic centres.

Typical places for toughened safety glass:

Glazed doors and side panels
Shower screens and splashbacks
Panes below 800 mm in homes and offices
Balustrades in a laminated toughened makeup

Things to decide before you order

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Rules that apply in England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Guide price online or by phone
Survey in Hereford
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Hereford: questions

Which areas near Hereford do you cover?

We can arrange work in Hereford and in nearby Ross-on-Wye (11 miles), Leominster (12 miles) and Malvern (17 miles). Dates depend on installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Toughened safety glass in nearby towns

Other glazing in Hereford

Tell us about the glazing and we will come back with a guide price.