Toughened safety glass in Loughton

How much does toughened safety glass cost in Loughton?

Our guide range for toughened safety glass is £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Work in Loughton is arranged individually, so travel and glass delivery are confirmed in your written price before anything is booked.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Options for toughened safety glass in Loughton

Single panes or the outer pane of a sealed unit
Heat-soaked option for large and overhead panes
Clear, tinted, obscure, low-iron and sandblasted finishes
Made to BS EN 12150 and marked for identification
Made to measure for each opening
Breaks into small blunt fragments

Fitting in Loughton

Surveys and fitting in Loughton are arranged case by case because of travel and glass delivery. Tell us about the job and we will come back with options.

Essex runs from Chelmsford and Colchester's town-centre retail and Georgian streets to Southend's seafront and large post-war and new-build estates in Basildon and Harlow.

Typical places for toughened safety glass:

Frameless office partitions and doors
Glazed doors and side panels
Panes below 800 mm in homes and offices
Balustrades in a laminated toughened makeup

Things to decide before you order

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Rules that apply in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Send sizes, photos and your postcode
We confirm what is possible and when
Fixed price in writing
Glass made, delivered and fitted

Toughened safety glass in Loughton: questions

Can you work in Loughton?

Work in Loughton is arranged individually because of travel. Send your postcode and details and we will confirm what is possible.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Toughened safety glass in nearby towns

Other glazing in Loughton

Send sizes and photos with the form, or call 0800 088 6248.