Toughened safety glass in Beverley

How much should I budget for toughened safety glass in Beverley?

Our guide range for toughened safety glass in Beverley is £114 to £414 including VAT (£95 to £345 plus VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

Single panes or the outer pane of a sealed unit
Clear, tinted, obscure, low-iron and sandblasted finishes
Heat-soaked option for large and overhead panes
Made to BS EN 12150 and marked for identification
Four to five times the strength of annealed glass
Holes, notches and polished edges for frameless fittings

Fitting in Beverley and nearby

Surveys in Beverley (HU17) are booked around installer availability. We also cover nearby Hull (8 miles), Driffield (11 miles) and Bridlington (19 miles).

The East Riding takes in Hull's Victorian and inter-war housing and city-centre shops, Georgian frontages in Beverley, and seaside towns such as Bridlington exposed to North Sea weather.

Common uses:

Glazed doors and side panels
Shower screens and splashbacks
Balustrades in a laminated toughened makeup
Frameless office partitions and doors

What to think about first

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Consents and safety: England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Guide price online or by phone
Survey in Beverley
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Beverley: questions

Can you survey in Beverley and nearby towns?

Yes. Surveys in Beverley, Hull and Driffield are booked around installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Beverley

Tell us about the glazing and we will come back with a guide price.